ramips: backport series of patches that ensure GCRs of other CPUs are accessed properly

[openwrt/openwrt.git] / target / linux / ramips / dts / WZR-AGL300NH.dts

diff --git a/target/linux/ramips/dts/WZR-AGL300NH.dts b/target/linux/ramips/dts/WZR-AGL300NH.dts
index 8e18e90be237b91558bcbac3ca3d7334fcf2d5b8..98b50babd73159b2eede30ce3ab93e7947b97353 100644 (file)
--- a/target/linux/ramips/dts/WZR-AGL300NH.dts
+++ b/target/linux/ramips/dts/WZR-AGL300NH.dts
@@ -26,7 +26,6 @@
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -37,16 +36,19 @@
                        reg = <0x0 0x30000>;
                        read-only;
                };
+
                partition@30000 {
                        label = "uboot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };
+
                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };
+
                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x3b0000>;
@@ -57,12 +59,13 @@
                status = "okay";
                mtd-mac-address = <&factory 0x4>;
 
-                port@0 {
+               port@0 {
                        ralink,fixed-link = <1000 1 1 1>;
                };
 
                mdio-bus {
                        status = "okay";
+
                        phy0: ethernet-phy@0 {
                                phy-mode = "mii";
                                reg = <0>;
@@ -85,16 +88,19 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 0 1>;
                        linux,code = <0x211>;
                };
+
                router {
                        label = "router_switch";
                        gpios = <&gpio0 7 0>;
                        linux,code = <0x100>;
                };
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 9 1>;
@@ -106,19 +112,22 @@
                compatible = "gpio-leds";
 
                router {
-                       label = "buffalo:green:router";
+                       label = "wzr-agl300nh:green:router";
                        gpios = <&gpio0 8 1>;
                };
+
                diag {
-                       label = "buffalo:red:diag";
+                       label = "wzr-agl300nh:red:diag";
                        gpios = <&gpio0 12 1>;
                };
+
                security_g {
-                       label = "buffalo:orange:security_g";
+                       label = "wzr-agl300nh:orange:security_g";
                        gpios = <&gpio0 11 1>;
                };
+
                security_n {
-                       label = "buffalo:orange:security_n";
+                       label = "wzr-agl300nh:orange:security_n";
                        gpios = <&gpio0 13 1>;
                };
        };
@@ -129,7 +138,6 @@
                reg = <0x00440000 0x20000>;
                #address-cells = <1>;
                #size-cells = <1>;
-
                status = "ok";
        };
 };