ramips: specify "firmware" partition format in JBOOT devices

[openwrt/openwrt.git] / target / linux / ramips / dts / Y1S.dts

diff --git a/target/linux/ramips/dts/Y1S.dts b/target/linux/ramips/dts/Y1S.dts
index 9ecac37225b9c6ddc69c9427273ec2b4295119e1..d2b917e80dd0a3773b6e5e38394723a80450f8e9 100644 (file)
--- a/target/linux/ramips/dts/Y1S.dts
+++ b/target/linux/ramips/dts/Y1S.dts
@@ -1,79 +1,115 @@
 /dts-v1/;
 
-/include/ "Y1.dtsi"
+#include "Y1.dtsi"
 
 / {
-       compatible = "lenovo,Y1S", "ralink,mt7620a-soc";
+       compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc";
        model = "Lenovo Y1S";
 
-       ethernet@10100000 {
-               status = "okay";
-               mtd-mac-address = <&factory 0x4>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+       aliases {
+               led-boot = &led_power_blue;
+               led-failsafe = &led_power_blue;
+               led-running = &led_power_blue;
+               led-upgrade = &led_power_blue;
+       };
 
-               ralink,port-map = "wllll";
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
 
-               port@4 {
-                       status = "okay";
-                       phy-handle = <&phy4>;
-                       phy-mode = "rgmii";
+               usb0 {
+                       gpio-export,name = "usb0";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
                };
-
-               port@5 {
-                       status = "okay";
-                       phy-handle = <&phy5>;
-                       phy-mode = "rgmii";
+               usb1 {
+                       gpio-export,name = "usb1";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
                };
-
-               mdio-bus {
-                       status = "okay";
-
-                       phy4: ethernet-phy@4 {
-                               reg = <4>;
-                               phy-mode = "rgmii";
-                       };
-
-                       phy5: ethernet-phy@5 {
-                               reg = <5>;
-                               phy-mode = "rgmii";
-                       };
+               usb2 {
+                       gpio-export,name = "usb2";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
                };
        };
 
-       gsw@10110000 {
-               ralink,port4 = "gmac";
-       };
-       
        gpio-leds {
                compatible = "gpio-leds";
+
                power1 {
-                       label = "lenovo:yellow:power";
-                       gpios = <&gpio0 14 1>;
+                       label = "y1s:yellow:power";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
-               power2 {
-                       label = "lenovo:blue:power";
-                       gpios = <&gpio0 9 1>;
+
+               led_power_blue: power2 {
+                       label = "y1s:blue:power";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
+
                wlan1 {
-                       label = "lenovo:yellow:wifi";
-                       gpios = <&gpio3 0 1>;
+                       label = "y1s:yellow:wifi";
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
+
                wlan2 {
-                       label = "lenovo:blue:wifi";
-                       gpios = <&gpio2 10 1>;
+                       label = "y1s:blue:wifi";
+                       gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
                };
+
                usb1 {
-                       label = "lenovo:yellow:usb";
-                       gpios = <&gpio2 13 1>;
+                       label = "y1s:yellow:usb";
+                       gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
                };
+
                usb2 {
-                       label = "lenovo:blue:usb";
-                       gpios = <&gpio2 12 1>;
+                       label = "y1s:blue:usb";
+                       gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
                };
+
                internet {
-                       label = "lenovo:blue:internet";
-                       gpios = <&gpio2 11 1>;
+                       label = "y1s:blue:internet";
+                       gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
                };
        };
 };
+
+&ethernet {
+       status = "okay";
+       mtd-mac-address = <&factory 0x4>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+       mediatek,portmap = "wllll";
+
+       port@4 {
+               status = "okay";
+               phy-handle = <&phy4>;
+               phy-mode = "rgmii";
+       };
+
+       port@5 {
+               status = "okay";
+               phy-handle = <&phy5>;
+               phy-mode = "rgmii";
+       };
+
+       mdio-bus {
+               status = "okay";
+
+               phy4: ethernet-phy@4 {
+                       reg = <4>;
+                       phy-mode = "rgmii";
+               };
+
+               phy5: ethernet-phy@5 {
+                       reg = <5>;
+                       phy-mode = "rgmii";
+               };
+       };
+};
+
+&gsw {
+       mediatek,port4 = "gmac";
+};