#include "mt7620a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "ZTE-Q7", "ralink,mt7620a-soc";
+ compatible = "zte,q7", "ralink,mt7620a-soc";
model = "ZTE Q7";
+ aliases {
+ led-status = &led_status_blue;
+ };
+
gpio-leds {
compatible = "gpio-leds";
statred {
label = "zte-q7:red:status";
- gpios = <&gpio0 13 1>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
- statblue {
+ led_status_blue: statblue {
label = "zte-q7:blue:status";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio1 2 1>;
- linux,code = <0x198>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
};
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
+ reg = <0>;
spi-max-frequency = <10000000>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
};
};
ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "wllll";
};
&ohci {
status = "okay";
};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};