#include <dt-bindings/input/input.h>
/ {
+ compatible = "zyxel,keenetic-omni", "ralink,mt7620n-soc";
model = "ZyXEL Keenetic Omni";
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
gpio-leds {
compatible = "gpio-leds";
wan {
label = "kn_rc:green:wan";
- gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
usb {
label = "kn_rc:green:usb";
- gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
wifi {
label = "kn_rc:green:wifi";
- gpios = <&gpio0 72 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
- power {
+ led_power: power {
label = "kn_rc:green:power";
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
};
gpio-keys-polled {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
linux,code = <BTN_0>;
};
};
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb_power {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
};
ðernet {
mtd-mac-address = <&factory 0x4>;
- ralink,port-map = "wllll";
+ mediatek,portmap = "llllw";
};
&wmac {