ramips: add support for D-Link DRA-1360

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_aigale_ai-br100.dts

diff --git a/target/linux/ramips/dts/mt7620a_aigale_ai-br100.dts b/target/linux/ramips/dts/mt7620a_aigale_ai-br100.dts
index 8de4b5877adffc7d0eb085939a2b41d47ff97d49..1142746c7afea5ae64997c9d404f2b36542c4f7e 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_aigale_ai-br100.dts
+++ b/target/linux/ramips/dts/mt7620a_aigale_ai-br100.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "mt7620a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -20,19 +18,18 @@
                compatible = "gpio-leds";
 
                wan {
-                       label = "ai-br100:blue:wan";
+                       label = "blue:wan";
                        gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
 
                led_wlan: wlan {
-                       label = "ai-br100:blue:wlan";
+                       label = "blue:wlan";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
 
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
+               compatible = "gpio-keys";
 
                reset {
                        label = "reset";
@@ -53,9 +50,9 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
-               reg = <0 0>;
+               reg = <0>;
                spi-max-frequency = <10000000>;
 
                partitions {
@@ -98,20 +95,30 @@
        status = "okay";
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       gpio {
+               groups = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+               function = "gpio";
        };
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
+
        mediatek,portmap = "llllw";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_4: macaddr@4 {
+               reg = <0x4 0x6>;
+       };
 };