ramips: mt7620: use OKLI loader with Jboot devices
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_dlink_dwr-118-a1.dts
index a69b17d7397bff63d5e0975c927c5c85a47f7d6d..8ae566d448b999e6f37ec23e85f8c57c3d99f45a 100644 (file)
@@ -1,10 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
 #include "mt7620a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
        compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc";
                compatible = "gpio-leds";
 
                wan {
-                       label = "dwr-118-a1:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
 
                led_internet: internet {
-                       label = "dwr-118-a1:green:internet";
+                       label = "green:internet";
                        gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
                };
 
                lan {
-                       label = "dwr-118-a1:green:lan";
+                       label = "green:lan";
                        gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
                };
 
                wlan2g {
-                       label = "dwr-118-a1:green:wlan2g";
+                       label = "green:wlan2g";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "dwr-118-a1:green:usb";
+                       label = "green:usb";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
                        };
 
                        partition@10000 {
-                               compatible = "amit,jimage";
+                               compatible = "openwrt,uimage", "denx,uimage";
+                               openwrt,ih-magic = <IH_MAGIC_OKLI>;
+                               openwrt,offset = <0x10000>;
                                label = "firmware";
                                reg = <0x10000 0xfe0000>;
                        };
 
 &state_default {
        default {
-               ralink,group = "ephy", "uartf", "spi refclk", "wled";
-               ralink,function = "gpio";
+               groups = "ephy", "uartf", "spi refclk", "wled";
+               function = "gpio";
        };
 };
 
 &pcie0 {
        wifi@0,0 {
                reg = <0x0000 0 0 0 0>;
-               mtd-mac-address = <&config 0xe496>;
-               mtd-mac-address-increment = <(2)>;
+               nvmem-cells = <&macaddr_config_e496>;
+               nvmem-cell-names = "mac-address";
+               mac-address-increment = <(2)>;
                mediatek,mtd-eeprom = <&config 0xe083>;
 
                led {
 };
 
 &ethernet {
-       status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
 
 };
 
 &gsw {
-       mediatek,port4 = "gmac";
+       mediatek,port4-gmac;
+       mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&config {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_config_e496: macaddr@e496 {
+               reg = <0xe496 0x6>;
+       };
 };