ramips: enable wireless LEDs activity blinking for TP-Link EC330-G5u v1

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_dlink_dwr-118-a2.dts

diff --git a/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts b/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts
index 449f4ff4b62ed2a4c0939cad809a85866b210a4a..42f5c861609b8a10e975d4589c3fa732124dc833 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts
+++ b/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts
@@ -1,9 +1,8 @@
-/dts-v1/;
-
 #include "mt7620a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
        compatible = "dlink,dwr-118-a2", "ralink,mt7620a-soc";
@@ -34,27 +33,27 @@
                compatible = "gpio-leds";
 
                wan {
-                       label = "dwr-118-a2:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
 
                led_internet: internet {
-                       label = "dwr-118-a2:green:internet";
+                       label = "green:internet";
                        gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
                };
 
                lan {
-                       label = "dwr-118-a2:green:lan";
+                       label = "green:lan";
                        gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
                };
 
                wlan2g {
-                       label = "dwr-118-a2:green:wlan2g";
+                       label = "green:wlan2g";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "dwr-118-a2:green:usb";
+                       label = "green:usb";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
@@ -105,7 +104,9 @@
                        };
 
                        partition@10000 {
-                               compatible = "amit,jimage";
+                               compatible = "openwrt,uimage", "denx,uimage";
+                               openwrt,ih-magic = <IH_MAGIC_OKLI>;
+                               openwrt,offset = <0x10000>;
                                label = "firmware";
                                reg = <0x10000 0xfe0000>;
                        };
@@ -127,12 +128,10 @@
        status = "okay";
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               default {
-                       ralink,group = "ephy", "uartf", "spi refclk", "wled";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       default {
+               groups = "ephy", "uartf", "spi refclk", "wled";
+               function = "gpio";
        };
 };
 
@@ -144,8 +143,9 @@
        wifi@0,0 {
                reg = <0x0000 0 0 0 0>;
                ieee80211-freq-limit = <5000000 6000000>;
-               mtd-mac-address = <&config 0xe4a8>;
-               mtd-mac-address-increment = <(2)>;
+               nvmem-cells = <&macaddr_config_e4a8>;
+               nvmem-cell-names = "mac-address";
+               mac-address-increment = <(2)>;
 
                led {
                        led-sources = <2>;
@@ -155,11 +155,11 @@
 };
 
 &ethernet {
-       status = "okay";
-       mediatek,portmap = "wllll";
        pinctrl-names = "default";
        pinctrl-0 = <&rgmii1_pins &mdio_pins>;
 
+       mediatek,portmap = "wllll";
+
        port@4 {
                status = "okay";
                phy-handle = <&phy0>;
@@ -177,6 +177,16 @@
 };
 
 &gsw {
-       mediatek,port4 = "gmac";
-       mediatek,ephy-base-address = /bits/ 16 < 2 >;
+       mediatek,port4-gmac;
+       mediatek,ephy-base = /bits/ 8 <2>;
+};
+
+&config {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_config_e4a8: macaddr@e4a8 {
+               reg = <0xe4a8 0x6>;
+       };
 };