ramips: enable wireless LEDs activity blinking for TP-Link EC330-G5u v1

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_dlink_dwr-118-a2.dts

diff --git a/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts b/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts
index b0dd31cafcd8974bff7159325192b5dcf8e77fe5..42f5c861609b8a10e975d4589c3fa732124dc833 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts
+++ b/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
        compatible = "dlink,dwr-118-a2", "ralink,mt7620a-soc";
@@ -103,7 +104,9 @@
                        };
 
                        partition@10000 {
-                               compatible = "amit,jimage";
+                               compatible = "openwrt,uimage", "denx,uimage";
+                               openwrt,ih-magic = <IH_MAGIC_OKLI>;
+                               openwrt,offset = <0x10000>;
                                label = "firmware";
                                reg = <0x10000 0xfe0000>;
                        };
@@ -140,8 +143,9 @@
        wifi@0,0 {
                reg = <0x0000 0 0 0 0>;
                ieee80211-freq-limit = <5000000 6000000>;
-               mtd-mac-address = <&config 0xe4a8>;
-               mtd-mac-address-increment = <(2)>;
+               nvmem-cells = <&macaddr_config_e4a8>;
+               nvmem-cell-names = "mac-address";
+               mac-address-increment = <(2)>;
 
                led {
                        led-sources = <2>;
@@ -176,3 +180,13 @@
        mediatek,port4-gmac;
        mediatek,ephy-base = /bits/ 8 <2>;
 };
+
+&config {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_config_e4a8: macaddr@e4a8 {
+               reg = <0xe4a8 0x6>;
+       };
+};