compatible = "gpio-leds";
led_power: power {
- label = "esr600:amber:power";
+ label = "amber:power";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wps2g {
- label = "esr600:amber:wps2g";
+ label = "amber:wps2g";
gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
};
wlan5g {
- label = "esr600:blue:wlan5g";
+ label = "blue:wlan5g";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
wlan2g {
- label = "esr600:blue:wlan2g";
+ label = "blue:wlan2g";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
};
};
-&gpio1 {
- status = "okay";
-};
-
&gpio2 {
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &mdio_pins>;
- mtd-mac-address = <&iNIC_rf 0x4>;
+ nvmem-cells = <&macaddr_iNIC_rf_4>;
+ nvmem-cell-names = "mac-address";
port@5 {
status = "okay";
mdio-bus {
status = "okay";
- mediatek,mdio-mode;
ethernet-phy@0 {
reg = <0>;
0x7c 0x0000007e /* PORT0 STATUS */
0x0c 0x05600000 /* PORT6 PAD MODE CTRL */
0x94 0x0000007e /* PORT6 STATUS */
- >;
+ >;
};
};
};
+&gsw {
+ mediatek,ephy-base = /bits/ 8 <8>;
+};
+
&state_default {
gpio {
groups = "i2c", "uartf", "nd_sd", "wled";
&ohci {
status = "okay";
};
+
+&iNIC_rf {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_iNIC_rf_4: macaddr@4 {
+ reg = <0x4 0x6>;
+ };
+};