ramips: add support for ALFA Network AX1800RM

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_glinet_gl-mt300n.dts

diff --git a/target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts b/target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts
index a30792cacea90d28f59f5e2aed7f7e290ae8df3f..70d0827ed2bbe23975b541ff316237c681174396 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts
+++ b/target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "mt7620a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -9,6 +7,10 @@
        compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc";
        model = "GL-MT300N";
 
+       aliases {
+               label-mac-device = &wmac;
+       };
+
        chosen {
                bootargs = "console=ttyS0,115200";
        };
@@ -33,8 +35,8 @@
        };
 
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
+               compatible = "gpio-keys";
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
@@ -55,14 +57,6 @@
        };
 };
 
-&gpio0 {
-       status = "okay";
-};
-
-&gpio1 {
-       status = "okay";
-};
-
 &gpio2 {
        status = "okay";
 };
@@ -74,7 +68,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -124,19 +118,29 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4000>;
+       nvmem-cells = <&macaddr_factory_4000>;
+       nvmem-cell-names = "mac-address";
+
        mediatek,portmap = "wllll";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       ralink,mtd-eeprom = <&factory 0x0>;
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "wled","ephy","i2c";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       gpio {
+               groups = "wled","ephy","i2c";
+               function = "gpio";
+       };
+};
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_4000: macaddr@4000 {
+               reg = <0x4000 0x6>;
        };
 };