ramips: convert MT7628 EEPROM to NVMEM format
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_lava_lr-25g001.dts
index 2f882b3b5040f1e1ed2aa8c48bb54ab740b41288..07355a05a5ad3f7acd472f2ad1676bee9eecd65c 100644 (file)
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
        compatible = "lava,lr-25g001", "ralink,mt7620a-soc";
                wifi2g {
                        label = "green:wifi2g";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
                };
 
                wifi5g {
                        label = "green:wifi5g";
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
                };
        };
 
@@ -81,7 +84,9 @@
                        };
 
                        partition@10000 {
-                               compatible = "amit,jimage";
+                               compatible = "openwrt,uimage", "denx,uimage";
+                               openwrt,ih-magic = <IH_MAGIC_OKLI>;
+                               openwrt,offset = <0x10000>;
                                label = "firmware";
                                reg = <0x10000 0xfe0000>;
                        };
                                0x04 0x87300000 /* PORT0 PAD MODE CTRL */
                                0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
                                0x7c 0x0000007e /* PORT0_STATUS */
+                               0x80 0x00001200 /* PORT1_STATUS */
+                               0x84 0x00001200 /* PORT2_STATUS */
+                               0x88 0x00001200 /* PORT3_STATUS */
+                               0x8c 0x00001200 /* PORT4_STATUS */
+                               0x90 0x00001200 /* PORT5_STATUS */
                                0x94 0x00000000 /* PORT6_STATUS */
                        >;
                };
 &pcie0 {
        mt76x0e@0,0 {
                reg = <0x0000 0 0 0 0>;
-               mtd-mac-address = <&config 0xe07e>;
+               nvmem-cells = <&macaddr_config_e07e>;
+               nvmem-cell-names = "mac-address";
                mac-address-increment = <(2)>;
                mediatek,mtd-eeprom = <&config 0xe08a>;
        };
                function = "gpio";
        };
 };
+
+&config {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_config_e07e: macaddr@e07e {
+               reg = <0xe07e 0x6>;
+       };
+};