ramips: use NVMEM cells with mt76 EEPROM for Netgear R6220 & WNDR3700 v5

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_ohyeah_oy-0001.dts

diff --git a/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts b/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts
index b8f86fad50c5828f35d4b70120fc1047d609f062..a691f4203fef53723e00a3f59dac9538a8296262 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts
+++ b/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "mt7620a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -24,12 +22,12 @@
                compatible = "gpio-leds";
 
                led_power: powerled {
-                       label = "oy-0001:green:power";
+                       label = "green:power";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wifiled {
-                       label = "oy-0001:green:wifi";
+                       label = "green:wifi";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
@@ -45,10 +43,6 @@
        };
 };
 
-&gpio2 {
-       status = "okay";
-};
-
 &gpio3 {
        status = "okay";
 };
@@ -56,7 +50,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -103,16 +97,15 @@
 &ethernet {
        pinctrl-names = "default";
        pinctrl-0 = <&ephy_pins>;
-       mtd-mac-address = <&factory 0x28>;
-       mediatek,portmap = "llllw";
-};
 
-&gsw {
-       mediatek,port4 = "ephy";
+       nvmem-cells = <&macaddr_factory_28>;
+       nvmem-cell-names = "mac-address";
+
+       mediatek,portmap = "llllw";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       ralink,mtd-eeprom = <&factory 0x0>;
 };
 
 &sdhci {
@@ -126,3 +119,13 @@
 &ohci {
        status = "okay";
 };
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_28: macaddr@28 {
+               reg = <0x28 0x6>;
+       };
+};