ramips: add support for SNR-CPE-ME2-SFP

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_phicomm_psg1208.dts

diff --git a/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts b/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts
index 34dfc9976d96b4b5e96bc6da9bde62673c141077..4e123c32bde5c0eae9a8ef5cb02b2365afa50159 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts
+++ b/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "mt7620a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -20,12 +18,12 @@
                compatible = "gpio-leds";
 
                led_wps: wps {
-                       label = "psg1208:white:wps";
+                       label = "white:wps";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
-                       label = "psg1208:white:wlan2g";
+                       label = "white:wlan2g";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
@@ -52,10 +50,11 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
-               spi-max-frequency = <10000000>;
+               spi-max-frequency = <80000000>;
+               m25p,fast-read;
 
                partitions {
                        compatible = "fixed-partitions";
@@ -99,7 +98,10 @@
 &ethernet {
        pinctrl-names = "default";
        pinctrl-0 = <&ephy_pins>;
-       mtd-mac-address = <&factory 0x4>;
+
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
+
        mediatek,portmap = "llllw";
 };
 
@@ -116,5 +118,15 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_4: macaddr@4 {
+               reg = <0x4 0x6>;
+       };
 };