ramips: fix label-mac for Xiaomi RA75
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_tplink_archer-c50-v1.dts
index c23538ca52830e99994db3350cc23beccd574183..439bc36dc3a21d4a372f750e7d65631d85153b35 100644 (file)
@@ -1,9 +1,4 @@
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7620a_tplink_archer.dtsi"
 
 / {
        compatible = "tplink,archer-c50-v1", "ralink,mt7620a-soc";
                led-upgrade = &led_power;
        };
 
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
        leds {
                compatible = "gpio-leds";
 
                lan {
-                       label = "archer-c50-v1:green:lan";
+                       label = "green:lan";
                        gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                };
 
                led_power: power {
-                       label = "archer-c50-v1:green:power";
+                       label = "green:power";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                usb {
-                       label = "archer-c50-v1:green:usb";
+                       label = "green:usb";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
                };
 
                wan {
-                       label = "archer-c50-v1:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
                };
 
                wan_orange {
-                       label = "archer-c50-v1:orange:wan";
+                       label = "orange:wan";
                        gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
 
                wlan5g {
-                       label = "archer-c50-v1:green:wlan5g";
+                       label = "green:wlan5g";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
                };
 
                wlan2g {
-                       label = "archer-c50-v1:green:wlan2g";
+                       label = "green:wlan2g";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
                };
 
                wps {
-                       label = "archer-c50-v1:green:wps";
+                       label = "green:wps";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-       };
 };
 
-&gpio1 {
-       status = "okay";
-};
-
-&gpio2 {
-       status = "okay";
-};
-
-&gpio3 {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x20000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               compatible = "tplink,firmware";
-                               label = "firmware";
-                               reg = <0x20000 0x7a0000>;
-                       };
-
-                       partition@7c0000 {
-                               label = "config";
-                               reg = <0x7c0000 0x10000>;
-                               read-only;
-                       };
-
-                       rom: partition@7d0000 {
-                               label = "rom";
-                               reg = <0x7d0000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@7e0000 {
-                               label = "romfile";
-                               reg = <0x7e0000 0x10000>;
-                               read-only;
-                       };
-
-                       radio: partition@7f0000 {
-                               label = "radio";
-                               reg = <0x7f0000 0x10000>;
-                               read-only;
-                       };
-               };
+&state_default {
+       gpio {
+               groups = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
+               function = "gpio";
        };
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&ethernet {
-               pinctrl-names = "default";
-               mtd-mac-address = <&rom 0xf100>;
-               mediatek,portmap = "wllll";
-       };
-
-&ehci {
-       status = "okay";
-};
-
-&ohci {
-       status = "okay";
-};
-
-&gsw {
-       mediatek,port4 = "ephy";
-};
-
 &wmac {
-       ralink,mtd-eeprom = <&radio 0>;
-       mtd-mac-address = <&rom 0xf100>;
-       mtd-mac-address-increment = <(-2)>;
-       pinctrl-names = "default";
+       pinctrl-names = "default", "pa_gpio";
        pinctrl-0 = <&pa_pins>;
-};
+       pinctrl-1 = <&pa_gpio_pins>;
 
-&pcie {
-       status = "okay";
+       nvmem-cells = <&macaddr_rom_f100 (-2)>;
+       nvmem-cell-names = "mac-address";
 };
 
-&pcie0 {
-       mt76@0,0 {
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&radio 32768>;
-               ieee80211-freq-limit = <5000000 6000000>;
-               mtd-mac-address = <&rom 0xf100>;
-               mtd-mac-address-increment = <(-1)>;
-       };
+&wifi {
+       nvmem-cells = <&macaddr_rom_f100 (-1)>;
+       nvmem-cell-names = "mac-address";
 };