ramips: fix mac addresses of Youku YK1

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_youku_yk1.dts

diff --git a/target/linux/ramips/dts/mt7620a_youku_yk1.dts b/target/linux/ramips/dts/mt7620a_youku_yk1.dts
index 82be9c4c9741161bd6590a9f3cdb4cfa5f049a13..61da408f2765d6e43e1b0187878d82d3036ac2e5 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_youku_yk1.dts
+++ b/target/linux/ramips/dts/mt7620a_youku_yk1.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "mt7620a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -14,30 +12,31 @@
                led-failsafe = &led_power;
                led-running = &led_power;
                led-upgrade = &led_power;
+               label-mac-device = &ethernet;
        };
 
        leds {
                compatible = "gpio-leds";
 
                wan {
-                       label = "yk1:blue:wan";
+                       label = "blue:wan";
                        gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
 
                air {
-                       label = "yk1:blue:air";
+                       label = "blue:air";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "yk1:blue:usb";
+                       label = "blue:usb";
                        gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
                };
 
                led_power: power {
-                       label = "yk1:blue:power";
+                       label = "blue:power";
                        gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
                };
        };
@@ -53,10 +52,6 @@
        };
 };
 
-&gpio0 {
-       status = "okay";
-};
-
 &gpio1 {
        status = "okay";
 };
@@ -72,7 +67,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "mx25l25635f", "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;
@@ -110,23 +105,23 @@
        };
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               default {
-                       ralink,group = "i2c", "rgmii1", "ephy", "wled";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       default {
+               groups = "i2c", "rgmii1", "ephy", "wled";
+               function = "gpio";
        };
 };
 
 &ethernet {
        pinctrl-names = "default";
-       mtd-mac-address = <&factory 0x4>;
+
+       mtd-mac-address = <&factory 0x28>;
+
        mediatek,portmap = "llllw";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       ralink,mtd-eeprom = <&factory 0x0>;
 };
 
 &sdhci {