ramips: enable wireless LEDs activity blinking for TP-Link EC330-G5u v1

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_zbtlink_zbt-we826-e.dts

diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts
index 2496a16a29660609a4d19ed86ff551953456e2e0..fe5414815441cd2ded9667490276c06d3b44976b 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts
+++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts
@@ -1,5 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
 #include "mt7620a_zbtlink_zbt-we826.dtsi"
 
@@ -13,72 +12,38 @@
                compatible = "gpio-leds";
 
                led_power: gsm {
-                       label = "zbt-we826-e:blue:gsm";
+                       label = "blue:gsm";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                signal {
-                       label = "zbt-we826-e:green:signal";
+                       label = "green:signal";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                sim {
-                       label = "zbt-we826-e:red:sim";
+                       label = "red:sim";
                        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
                air {
-                       label = "zbt-we826-e:red:wifi";
+                       label = "red:wifi";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
 };
 
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
+&flash0 {
+       broken-flash-reset;
+};
 
-                       firmware: partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0x1fb0000>;
-                       };
-               };
-       };
+&firmware {
+       reg = <0x50000 0x1fb0000>;
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               default {
-                       ralink,group = "i2c", "uartf", "wled";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       default {
+               groups = "i2c", "uartf", "wled";
+               function = "gpio";
        };
 };