ramips: reset mt7620 ethernet phy via reset controller

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_zyxel_keenetic-viva.dts

diff --git a/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts b/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts
index 7f997eb97c77e16ec32b6e71c87b02f130c8dfd0..abeb4c2a2d1630bd3f43aefc0d6b9f9e2b2bc509 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts
+++ b/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts
@@ -18,29 +18,29 @@
                compatible = "gpio-leds";
 
                wan {
-                       label = "keenetic-viva:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "keenetic-viva:green:usb";
+                       label = "green:usb";
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
                };
 
                power_alert {
-                       label = "keenetic-viva:red:power";
+                       label = "red:power";
                        gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                };
 
                wifi {
-                       label = "keenetic-viva:green:wifi";
+                       label = "green:wifi";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                led_power_green: power {
-                       label = "keenetic-viva:green:power";
+                       label = "green:power";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
        };
@@ -115,6 +115,20 @@
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
@@ -137,7 +151,8 @@
        pinctrl-names = "default";
        pinctrl-0 = <&rgmii2_pins &mdio_pins>;
 
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 
        port@4 {
                status = "okay";
@@ -157,11 +172,13 @@
 };
 
 &gsw {
-       mediatek,port4 = "gmac";
+       mediatek,port4-gmac;
+       mediatek,ephy-base = /bits/ 8 <8>;
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &ehci {