ramips: set usb led trigger via devicetree

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620n.dtsi

diff --git a/target/linux/ramips/dts/mt7620n.dtsi b/target/linux/ramips/dts/mt7620n.dtsi
index 78d12a26865549b828225dfeb576da2f92ce1637..7fa15a6cefeb3ea8f7ba67c2e97f024d91a40014 100644 (file)
--- a/target/linux/ramips/dts/mt7620n.dtsi
+++ b/target/linux/ramips/dts/mt7620n.dtsi
@@ -1,11 +1,15 @@
 / {
        #address-cells = <1>;
        #size-cells = <1>;
-       compatible = "ralink,mtk7620n-soc";
+       compatible = "ralink,mt7620n-soc";
 
        cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
                cpu@0 {
                        compatible = "mips,mips24KEc";
+                       reg = <0>;
                };
        };
 
@@ -13,7 +17,7 @@
                bootargs = "console=ttyS0,57600";
        };
 
-       cpuintc: cpuintc@0 {
+       cpuintc: cpuintc {
                #address-cells = <0>;
                #interrupt-cells = <1>;
                interrupt-controller;
@@ -97,7 +101,7 @@
                        #gpio-cells = <2>;
 
                        ralink,gpio-base = <0>;
-                       ralink,num-gpios = <24>;
+                       ralink,nr-gpio = <24>;
                        ralink,register-map = [ 00 04 08 0c
                                                20 24 28 2c
                                                30 34 ];
@@ -114,7 +118,7 @@
                        #gpio-cells = <2>;
 
                        ralink,gpio-base = <24>;
-                       ralink,num-gpios = <16>;
+                       ralink,nr-gpio = <16>;
                        ralink,register-map = [ 00 04 08 0c
                                                10 14 18 1c
                                                20 24 ];
@@ -133,7 +137,7 @@
                        #gpio-cells = <2>;
 
                        ralink,gpio-base = <40>;
-                       ralink,num-gpios = <32>;
+                       ralink,nr-gpio = <32>;
                        ralink,register-map = [ 00 04 08 0c
                                                10 14 18 1c
                                                20 24 ];
@@ -152,7 +156,7 @@
                        #gpio-cells = <2>;
 
                        ralink,gpio-base = <72>;
-                       ralink,num-gpios = <1>;
+                       ralink,nr-gpio = <1>;
                        ralink,register-map = [ 00 04 08 0c
                                                10 14 18 1c
                                                20 24 ];
@@ -260,8 +264,8 @@
 
                spi_cs1: spi1 {
                        spi1 {
-                               ralink,group = "spi_cs1";
-                               ralink,function = "spi_cs1";
+                               ralink,group = "spi refclk";
+                               ralink,function = "spi refclk";
                        };
                };
 
@@ -345,6 +349,8 @@
        };
 
        ehci: ehci@101c0000 {
+               #address-cells = <1>;
+               #size-cells = <0>;
                compatible = "generic-ehci";
                reg = <0x101c0000 0x1000>;
 
@@ -355,9 +361,16 @@
                phy-names = "usb";
 
                status = "disabled";
+
+               ehci_port1: port@1 {
+                       reg = <1>;
+                       #trigger-source-cells = <0>;
+               };
        };
 
        ohci: ohci@101c1000 {
+               #address-cells = <1>;
+               #size-cells = <0>;
                compatible = "generic-ohci";
                reg = <0x101c1000 0x1000>;
 
@@ -368,6 +381,11 @@
                interrupts = <18>;
 
                status = "disabled";
+
+               ohci_port1: port@1 {
+                       reg = <1>;
+                       #trigger-source-cells = <0>;
+               };
        };
 
        wmac: wmac@10180000 {