ramips: add support for Sercomm CPJ routers

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620n_asus_rt-n12p.dts

diff --git a/target/linux/ramips/dts/mt7620n_asus_rt-n12p.dts b/target/linux/ramips/dts/mt7620n_asus_rt-n12p.dts
index 7a3105f9be139ae87e008a90258b3cc37ef70979..44904d148e69ad0088f3ac582e4d31f0b40042a5 100644 (file)
--- a/target/linux/ramips/dts/mt7620n_asus_rt-n12p.dts
+++ b/target/linux/ramips/dts/mt7620n_asus_rt-n12p.dts
@@ -22,22 +22,22 @@
                compatible = "gpio-leds";
 
                wan {
-                       label = "rt-n12p:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
 
                lan {
-                       label = "rt-n12p:green:lan";
+                       label = "green:lan";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
 
                led_power: power {
-                       label = "rt-n12p:green:power";
+                       label = "green:power";
                        gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
                };
 
                air {
-                       label = "rt-n12p:green:air";
+                       label = "green:air";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
@@ -91,9 +91,20 @@
                        };
 
                        factory: partition@40000 {
+                               compatible = "nvmem-cells";
                                label = "factory";
                                reg = <0x40000 0x10000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                read-only;
+
+                               eeprom_factory_0: eeprom@0 {
+                                       reg = <0x0 0x200>;
+                               };
+
+                               macaddr_factory_4: macaddr@4 {
+                                       reg = <0x4 0x6>;
+                               };
                        };
 
                        partition@50000 {
@@ -106,13 +117,15 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 
        mediatek,portmap = "llllw";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &state_default {