ramips: add support for TP-Link Archer C5 v4

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620n_nexx_wt3020.dtsi

diff --git a/target/linux/ramips/dts/mt7620n_nexx_wt3020.dtsi b/target/linux/ramips/dts/mt7620n_nexx_wt3020.dtsi
index 59558a2e963153f5c44d321a32f2aafaf207a406..be126d1e2752bff64e84ea401d358f7470404f68 100644 (file)
--- a/target/linux/ramips/dts/mt7620n_nexx_wt3020.dtsi
+++ b/target/linux/ramips/dts/mt7620n_nexx_wt3020.dtsi
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "nexx,wt3020", "ralink,mt7620n-soc";
@@ -11,11 +12,11 @@
                led-failsafe = &led_power;
                led-running = &led_power;
                led-upgrade = &led_power;
+               label-mac-device = &ethernet;
        };
 
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
+               compatible = "gpio-keys";
 
                reset {
                        label = "reset";
@@ -28,14 +29,65 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "wt3020:blue:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_BLUE>;
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
 };
 
-&gpio2 {
+&spi0 {
        status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
+                       };
+
+                       firmware: partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               /* reg property is set based on flash size in DTS files */
+                       };
+               };
+       };
 };
 
 &gpio3 {
@@ -43,19 +95,20 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
+
        mediatek,portmap = "wllll";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               default {
-                       ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       default {
+               groups = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
+               function = "gpio";
        };
 };