-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7620n_sunvalley_filehub.dtsi"
/ {
compatible = "ravpower,rp-wd03", "ralink,mt7620n-soc";
model = "RAVPower RP-WD03";
- chosen {
- bootargs = "console=ttyS0,115200";
+ aliases {
+ led-boot = &led_wifi_blue;
+ led-failsafe = &led_wifi_blue;
+ led-running = &led_wifi_blue;
+ led-upgrade = &led_wifi_blue;
};
leds {
compatible = "gpio-leds";
- green-wifi {
- label = "rp-wd03:green:wifi";
+ wifi_green {
+ label = "green:wifi";
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
};
- blue-wifi {
- label = "rp-wd03:blue:wifi";
+ led_wifi_blue: wifi_blue {
+ label = "blue:wifi";
gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
};
};
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4000>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&state_default {
- gpio {
- groups = "wled", "ephy";
- function = "gpio";
- };
};