-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7620n_sunvalley_filehub.dtsi"
/ {
compatible = "ravpower,rp-wd03", "ralink,mt7620n-soc";
model = "RAVPower RP-WD03";
aliases {
- label-mac-device = ðernet;
led-boot = &led_wifi_blue;
led-failsafe = &led_wifi_blue;
led-running = &led_wifi_blue;
compatible = "gpio-leds";
wifi_green {
- label = "rp-wd03:green:wifi";
+ label = "green:wifi";
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
};
led_wifi_blue: wifi_blue {
- label = "rp-wd03:blue:wifi";
+ label = "blue:wifi";
gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
};
};
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- virtual_flash {
- compatible = "mtd-concat";
-
- devices = <&firmware1 &firmware2 &firmware3>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- compatible = "openwrt,okli";
- label = "firmware";
- reg = <0x0 0x0>;
- };
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "loader";
- reg = <0x50000 0x10000>;
- read-only;
- };
-
- firmware2: partition@60000 {
- label = "firmware2";
- reg = <0x60000 0x170000>;
- };
-
- partition@1d0000 {
- label = "u-boot-env";
- reg = <0x1d0000 0x10000>;
- };
-
- firmware3: partition@1e0000 {
- label = "firmware3";
- reg = <0x1e0000 0x20000>;
- };
-
- firmware1: partition@200000 {
- label = "firmware1";
- reg = <0x200000 0x600000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&state_default {
- gpio {
- groups = "wled", "ephy";
- function = "gpio";
- };
};