ramips: sercomm s1500: enable wlan LEDs activity blinking

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620n_zbtlink_zbt-wr8305rt.dts

diff --git a/target/linux/ramips/dts/mt7620n_zbtlink_zbt-wr8305rt.dts b/target/linux/ramips/dts/mt7620n_zbtlink_zbt-wr8305rt.dts
index 78269ca78426c44c8ab3e868a0df12801fbf6460..20063e2b47d790b1bc06d7663ef61b29719232bf 100644 (file)
--- a/target/linux/ramips/dts/mt7620n_zbtlink_zbt-wr8305rt.dts
+++ b/target/linux/ramips/dts/mt7620n_zbtlink_zbt-wr8305rt.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "mt7620n.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -20,19 +18,19 @@
                compatible = "gpio-leds";
 
                led_sys: sys {
-                       label = "zbt-wr8305rt:green:sys";
+                       label = "green:sys";
                        gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
                };
 
                lan {
-                       label = "zbt-wr8305rt:green:usb";
+                       label = "green:usb";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
                };
 
                wifi {
-                       label = "zbt-wr8305rt:green:wifi";
+                       label = "green:wifi";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
@@ -59,7 +57,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -85,6 +83,20 @@
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
@@ -107,12 +119,16 @@
 &ethernet {
        pinctrl-names = "default";
        pinctrl-0 = <&ephy_pins>;
-       mtd-mac-address = <&factory 0x4>;
+
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
+
        mediatek,portmap = "llllw";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &state_default {