ramips: add support for Sercomm CPJ routers
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_adslr_g7.dts
index 3290a5e710c41c969a55eb9d49f6de7e1362115b..fe04648f0e24b9f948c5f9df028940dfd725bba0 100644 (file)
                        };
 
                        factory: partition@40000 {
+                               compatible = "nvmem-cells";
                                label = "factory";
                                reg = <0x40000 0x10000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                read-only;
+
+                               eeprom_factory_0: eeprom@0 {
+                                       reg = <0x0 0x4da8>;
+                               };
+
+                               eeprom_factory_8000: eeprom@8000 {
+                                       reg = <0x8000 0x4da8>;
+                               };
+
+                               macaddr_factory_e00c: macaddr@e00c {
+                                       reg = <0xe00c 0x6>;
+                               };
                        };
 
                        partition@50000 {
        wifi@0,0 {
                compatible = "mediatek,mt76";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0000>;
+               nvmem-cells = <&eeprom_factory_0>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <2400000 2500000>;
        };
 };
        wifi@0,0 {
                compatible = "mediatek,mt76";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
+               nvmem-cells = <&eeprom_factory_8000>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <5000000 6000000>;
        };
 };
 
 &gmac0 {
-       mtd-mac-address = <&factory 0xe00c>;
+       nvmem-cells = <&macaddr_factory_e00c>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy4>;
+
+       nvmem-cells = <&macaddr_factory_e00c>;
+       nvmem-cell-names = "mac-address";
+       mac-address-increment = <1>;
+};
+
+&mdio {
+       ethphy4: ethernet-phy@4 {
+               reg = <4>;
+       };
 };
 
 &switch0 {
                        status = "okay";
                        label = "lan4";
                };
-
-               port@4 {
-                       status = "okay";
-                       label = "wan";
-                       mtd-mac-address = <&factory 0xe00c>;
-                       mtd-mac-address-increment = <1>;
-               };
        };
 };