-/dts-v1/;
-
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
led-upgrade = &led_run;
};
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- palmbus: palmbus@1E000000 {
- i2c@900 {
- status = "okay";
- };
- };
-
keys {
compatible = "gpio-keys";
compatible = "gpio-leds";
led_run: run {
- label = "ew1200:green:run";
+ label = "green:run";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
usb {
- label = "ew1200:green:usb";
+ label = "green:usb";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
linux,default-trigger = "usbport";
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
&pcie0 {
- mt76@0,0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
+
+ led {
+ led-sources = <2>;
+ led-active-low;
+ };
};
};
&pcie1 {
- mt76@0,0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
ieee80211-freq-limit = <2400000 2500000>;
+
+ led {
+ led-sources = <0>;
+ led-active-low;
+ };
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+};
+
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
};
};
-ðernet {
- mtd-mac-address = <&factory 0xe000>;
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+ };
};
&state_default {
gpio {
- ralink,group = "wdt", "rgmii2", "jtag", "mdio";
- ralink,function = "gpio";
+ groups = "i2c", "uart3", "wdt";
+ function = "gpio";
+ };
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
};
};