ramips: rtxxxx: convert to nvmem-layout
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_dlink_dir-860l-b1.dts
index 65924bb2e65840ba8bb0233648f4815ea3cc65e5..36d22046a95a34b8e3fb1377ab25c64e1db24508 100644 (file)
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "mt7621.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
        model = "D-Link DIR-860L B1";
 
        aliases {
+               label-mac-device = &gmac0;
+
                led-boot = &led_power_green;
                led-failsafe = &led_power_green;
                led-running = &led_power_green;
                led-upgrade = &led_power_green;
-               label-mac-device = &wifi1;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600";
        };
 
        leds {
                compatible = "gpio-leds";
 
                power {
-                       label = "dir-860l-b1:orange:power";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+                       label = "orange:power";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                };
 
                led_power_green: power2 {
-                       label = "dir-860l-b1:green:power";
-                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+                       label = "green:power";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
 
                net {
-                       label = "dir-860l-b1:orange:net";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       label = "orange:net";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
 
                net2 {
-                       label = "dir-860l-b1:green:net";
-                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+                       label = "green:net";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                };
        };
 
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
@@ -65,7 +60,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                        };
 
                        radio: partition@34000 {
+                               compatible = "nvmem-cells";
                                label = "radio";
                                reg = <0x34000 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                read-only;
+
+                               macaddr_radio_4: macaddr@4 {
+                                       reg = <0x4 0x6>;
+                               };
+
+                               eeprom_radio_0: eeprom@0 {
+                                       reg = <0x0 0x200>;
+                               };
+
+                               eeprom_radio_2000: eeprom@2000 {
+                                       reg = <0x2000 0x200>;
+                               };
                        };
 
                        factory: partition@38000 {
        };
 };
 
+&gmac0 {
+       nvmem-cells = <&macaddr_radio_4>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy0>;
+
+       nvmem-cells = <&macaddr_radio_4>;
+       nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+};
+
+&switch0 {
+       ports {
+               port@1 {
+                       status = "okay";
+                       label = "lan4";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@4 {
+                       status = "okay";
+                       label = "lan1";
+               };
+       };
+};
+
 &pcie {
        status = "okay";
+
+       reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
+                     <&gpio 8 GPIO_ACTIVE_LOW>;
 };
 
 &pcie0 {
        wifi0: mt76@0,0 {
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&radio 0x2000>;
+               nvmem-cells = <&eeprom_radio_2000>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <5000000 6000000>;
        };
 };
 &pcie1 {
        wifi1: mt76@0,0 {
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&radio 0>;
+               nvmem-cells = <&eeprom_radio_0>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <2400000 2500000>;
        };
 };
 
 &state_default {
        gpio {
-               ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
-               ralink,function = "gpio";
+               groups = "uart3", "jtag", "wdt";
+               function = "gpio";
        };
 };