-/dts-v1/;
-
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
led-upgrade = &led_power;
};
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
chosen {
bootargs = "console=ttyS0,115200";
};
compatible = "gpio-leds";
led_power: power {
- label = "wn-gx300gr:green:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ label = "green:power";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wps {
- label = "wn-gx300gr:green:wps";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ label = "green:wps";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
+ compatible = "gpio-keys";
reset {
label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
auto {
label = "auto";
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
custom {
label = "custom";
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
read-only;
};
- Factory: partition@40000 {
- label = "Factory";
+ factory: partition@40000 {
+ label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
};
};
-ðernet {
- mtd-mac-address = <&Factory 0x4>;
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_4>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy0>;
+
+ nvmem-cells = <&macaddr_factory_4>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+};
+
+&mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uart2", "uart3", "jtag";
- ralink,function = "gpio";
+&switch0 {
+ ports {
+ port@1 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan2";
};
+
+ port@4 {
+ status = "okay";
+ label = "lan1";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "uart2", "uart3", "jtag";
+ function = "gpio";
};
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&Factory 0x0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
};
};
&xhci {
status = "disabled";
};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_4: macaddr@4 {
+ reg = <0x4 0x6>;
+ };
+};