ramips: enable wireless LEDs activity blinking for TP-Link EC330-G5u v1

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_mikrotik_routerboard-750gr3.dts

diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts
index 018e83664db81e676647fe4fcc906d67343f597b..aad8a6776d29edcfadbd5b509327ce4e609c2b82 100644 (file)
--- a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts
+++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts
@@ -1,10 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7621_mikrotik_routerboard-7xx.dtsi"
 
 / {
        compatible = "mikrotik,routerboard-750gr3", "mediatek,mt7621-soc";
@@ -15,154 +11,47 @@
                led-failsafe = &led_usr;
                led-running = &led_usr;
                led-upgrade = &led_usr;
-               label-mac-device = &gmac0;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
        };
 
        leds {
                compatible = "gpio-leds";
 
                pwr {
-                       label = "routerboard-750gr3:blue:pwr";
+                       label = "blue:pwr";
                        gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
 
                led_usr: usr {
-                       label = "routerboard-750gr3:green:usr";
+                       label = "green:usr";
                        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
                };
        };
+};
 
-       keys {
-               compatible = "gpio-keys";
-
-               mode {
-                       label = "mode";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       beeper {
-               compatible = "gpio-beeper";
-               gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
-       };
-
-       gpio_export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               usb_power {
-                       gpio-export,name = "usb_power";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
-               };
+&state_default {
+       gpio {
+               groups = "uart2", "jtag", "wdt";
+               function = "gpio";
        };
 };
 
-&spi0 {
+&gmac1 {
        status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy0>;
+};
 
-       flash@0 {
-               compatible = "jedec,spi-nor";
+&mdio {
+       ethphy0: ethernet-phy@0 {
                reg = <0>;
-               spi-max-frequency = <20000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "RouterBoot";
-                               reg = <0x0 0x40000>;
-                               read-only;
-                               compatible = "mikrotik,routerboot-partitions";
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partition@0 {
-                                       label = "bootloader1";
-                                       reg = <0x0 0x0>;
-                                       read-only;
-                               };
-
-                               hard_config: hard_config {
-                                       read-only;
-                               };
-
-                               partition@10000 {
-                                       label = "bootloader2";
-                                       reg = <0x10000 0xf000>;
-                                       read-only;
-                               };
-
-                               soft_config {
-                               };
-
-                               partition@30000 {
-                                       label = "bios";
-                                       reg = <0x30000 0x1000>;
-                                       read-only;
-                               };
-                       };
-
-                       partition@40000 {
-                               compatible = "mikrotik,minor";
-                               label = "firmware";
-                               reg = <0x040000 0xfc0000>;
-                       };
-               };
        };
 };
 
 &switch0 {
        ports {
                port@0 {
-                       status = "okay";
-                       label = "wan";
-               };
-
-               port@1 {
-                       status = "okay";
-                       label = "lan2";
-               };
-
-               port@2 {
-                       status = "okay";
-                       label = "lan3";
-               };
-
-               port@3 {
-                       status = "okay";
-                       label = "lan4";
-               };
-
-               port@4 {
-                       status = "okay";
-                       label = "lan5";
+                       status = "disabled";
                };
        };
 };
-
-&state_default {
-       gpio {
-               /* via gpio7 (uart3 group) the PoE status can be read */
-               groups = "uart2", "uart3", "jtag", "wdt";
-               function = "gpio";
-       };
-};
-
-&sdhci {
-       status = "okay";
-};