-/dts-v1/;
-
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
led-upgrade = &led_blue;
};
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
leds {
compatible = "gpio-leds";
stat_r {
- label = "k2p:red:status";
+ label = "red:status";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
stat_y {
- label = "k2p:yellow:status";
+ label = "yellow:status";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_blue: stat_b {
- label = "k2p:blue:status";
+ label = "blue:status";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <10000000>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
partitions {
compatible = "fixed-partitions";
};
};
-ðernet {
+&gmac0 {
mtd-mac-address = <&factory 0xe000>;
};
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&factory 0xe006>;
+ };
+ };
+};
+
&state_default {
gpio {
groups = "i2c", "jtag";