ramips: fix nvmem-cells for routers based on TP-Link Archer

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_planex_vr500.dts

diff --git a/target/linux/ramips/dts/mt7621_planex_vr500.dts b/target/linux/ramips/dts/mt7621_planex_vr500.dts
index 3d8d34648862cd6f58824a0048b350e4f067f0c9..4d281670ef9e841ba07df2912eb8b54a43a99ef9 100644 (file)
--- a/target/linux/ramips/dts/mt7621_planex_vr500.dts
+++ b/target/linux/ramips/dts/mt7621_planex_vr500.dts
@@ -1,9 +1,8 @@
-/dts-v1/;
-
 #include "mt7621.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "planex,vr500", "mediatek,mt7621-soc";
@@ -16,16 +15,13 @@
                led-upgrade = &led_power;
        };
 
-       chosen {
-               bootargs = "console=ttyS0,57600";
-       };
-
        leds {
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "vr500:green:power";
-                       gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -34,7 +30,7 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -43,7 +39,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -65,10 +61,24 @@
                                read-only;
                        };
 
-                       factory: partition@40000 {
+                       partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_factory_e000: macaddr@e000 {
+                                               reg = <0xe000 0x6>;
+                                       };
+
+                                       macaddr_factory_e006: macaddr@e006 {
+                                               reg = <0xe006 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
@@ -80,15 +90,53 @@
        };
 };
 
-&ethernet {
-       mtd-mac-address = <&factory 0xe000>;
+&gmac0 {
+       nvmem-cells = <&macaddr_factory_e000>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy4>;
+
+       nvmem-cells = <&macaddr_factory_e006>;
+       nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+       ethphy4: ethernet-phy@4 {
+               reg = <4>;
+       };
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
-                       ralink,function = "gpio";
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan3";
                };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan4";
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "sdhci";
+               function = "gpio";
        };
 };