-/dts-v1/;
-
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "planex,vr500", "mediatek,mt7621-soc";
led-upgrade = &led_power;
};
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
leds {
compatible = "gpio-leds";
led_power: power {
- label = "vr500:green:power";
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
};
};
keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
+ compatible = "gpio-keys";
reset {
label = "reset";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
read-only;
};
- factory: partition@40000 {
+ partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
+
+ macaddr_factory_e006: macaddr@e006 {
+ reg = <0xe006 0x6>;
+ };
+ };
};
partition@50000 {
};
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
- ralink,function = "gpio";
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
};
};
};
+
+&state_default {
+ gpio {
+ groups = "sdhci";
+ function = "gpio";
+ };
+};