ramips: add support for YunCore G720

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_raisecom_msg1500-x-00.dts

diff --git a/target/linux/ramips/dts/mt7621_raisecom_msg1500-x-00.dts b/target/linux/ramips/dts/mt7621_raisecom_msg1500-x-00.dts
index 07297df08330b7731998a44994a5945f43362f33..98a2ffad5f7f171976b8b1611196eb68b9647421 100644 (file)
--- a/target/linux/ramips/dts/mt7621_raisecom_msg1500-x-00.dts
+++ b/target/linux/ramips/dts/mt7621_raisecom_msg1500-x-00.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "raisecom,msg1500-x-00", "mediatek,mt7621-soc";
@@ -32,7 +33,8 @@
                };
 
                led_usb: usb {
-                       label = "blue:usb";
+                       function = LED_FUNCTION_USB;
+                       color = <LED_COLOR_ID_BLUE>;
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ehci_port2>;
                        linux,default-trigger = "usbport";
@@ -81,8 +83,6 @@
                        reg = <0x80000 0x80000>;
                        read-only;
 
-                       compatible = "nvmem-cells";
-
                        nvmem-layout {
                                compatible = "fixed-layout";
                                #address-cells = <1>;
@@ -102,17 +102,23 @@
                        };
                };
 
-               factory: partition@100000 {
+               partition@100000 {
                        label = "Factory";
                        reg = <0x100000 0x40000>;
                        read-only;
 
-                       compatible = "nvmem-cells";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
+                       nvmem-layout {
+                               compatible = "fixed-layout";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               eeprom_factory_0: eeprom@0 {
+                                       reg = <0x0 0x4da8>;
+                               };
 
-                       macaddr_factory_4: macaddr@4 {
-                               reg = <0x4 0x6>;
+                               macaddr_factory_4: macaddr@4 {
+                                       reg = <0x4 0x6>;
+                               };
                        };
                };
 
@@ -136,11 +142,10 @@
        wifi@0,0 {
                compatible = "mediatek,mt76";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0>;
                /* 5 GHz (phy1) does not take the address from calibration data,
                   but setting it manually here works */
-               nvmem-cells = <&macaddr_factory_4>;
-               nvmem-cell-names = "mac-address";
+               nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_4>;
+               nvmem-cell-names = "eeprom", "mac-address";
        };
 };