-/dts-v1/;
-
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
compatible = "storylink,sap-g3200u3", "mediatek,mt7621-soc";
model = "STORYLiNK SAP-G3200U3";
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
leds {
compatible = "gpio-leds";
usb {
- label = "sap-g3200u3:green:usb";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ label = "green:usb";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
reset {
label = "reset";
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
};
-ðernet {
- mtd-mac-address = <&factory 0xe006>;
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+};
+
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uart3", "jtag";
- ralink,function = "gpio";
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
};
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "uart3", "jtag";
+ function = "gpio";
+ };
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e006: macaddr@e006 {
+ reg = <0xe006 0x6>;
};
};