+// SPDX-License-Identifier: BSD-3-Clause
/*
- * BSD LICENSE
- *
* Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
* Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
* All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "mt7621.dtsi"
modem_reset {
gpio-export,name = "modem_reset";
gpio-export,output = <1>;
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
+ compatible = "gpio-keys";
reset {
label = "reset";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
compatible = "gpio-leds";
led_status: status {
- label = "u7621-06:green:status";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ label = "green:status";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
led4 {
- label = "u7621-06:green:led4";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ label = "green:led4";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
led5 {
- label = "u7621-06:green:led5";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ label = "green:led5";
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
};
};
};
-&gpio0 {
+&sdhci {
status = "okay";
};
-&sdhci {
+&pcie {
status = "okay";
};
-&pcie {
+&gmac1 {
status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
};
-ðernet {
- mtd-mac-address = <&factory 0xe000>;
- mediatek,portmap = "llllw";
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "uart2", "wdt";
- ralink,function = "gpio";
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
};
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "jtag", "uart2", "wdt";
+ function = "gpio";
};
};