// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7621_wavlink_wl-wn53xax.dtsi"
/ {
compatible = "wavlink,wl-wn531a6", "mediatek,mt7621-soc";
model = "Wavlink WL-WN531A6";
-
- aliases {
- led-boot = &led_status_red;
- led-failsafe = &led_status_red;
- led-running = &led_status_blue;
- led-upgrade = &led_status_red;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset Button";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- touch { /* RH6015C touch sensor -> GPIO 14 */
- label = "Touch Button";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- turbo {
- label = "Turbo Button";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
-
- wps {
- label = "WPS Button";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status_blue: status_blue {
- label = "wl-wn531a6:blue:power";
- gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_red: status_red {
- label = "wl-wn531a6:red:power";
- gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
- };
-
- wifi2g {
- label = "wl-wn531a6:blue:wifi2g";
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
- };
-};
-
-&i2c {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xeb0000>;
- };
-
- partition@f00000 {
- label = "vendor";
- reg = <0xf00000 0x100000>;
- read-only;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
};
-&pcie0 {
- mt76@0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0>;
- ieee80211-freq-limit = <2400000 2500000>;
- };
+&wifi0{
+ ieee80211-freq-limit = <2400000 2500000>;
};
-&pcie1 {
- mt76@0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
+&wifi1{
+ ieee80211-freq-limit = <5000000 6000000>;
};
-&gmac0 {
- mtd-mac-address = <&factory 0xe000>;
+&port0{
+ label = "lan1";
};
-&switch0 {
- ports {
- port@0 {
- status = "okay";
- label = "lan1";
- };
-
- port@1 {
- status = "okay";
- label = "lan2";
- };
-
- port@2 {
- status = "okay";
- label = "lan3";
- };
-
- port@3 {
- status = "okay";
- label = "lan4";
- };
-
- port@4 {
- status = "okay";
- label = "wan";
- mtd-mac-address = <&factory 0xe006>;
- };
- };
+&port1{
+ label = "lan2";
};
-&state_default {
- gpio {
- groups = "rgmii2", "jtag", "wdt";
- function = "gpio";
- };
+&port2{
+ label = "lan3";
};
-&uartlite2 {
- status = "okay";
+&port3{
+ label = "lan4";
};