#include <dt-bindings/input/input.h>
/ {
- chosen {
- bootargs = "console=ttyS0,57600";
+ aliases {
+ label-mac-device = &wan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
+ };
};
keys {
reset {
label = "reset";
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
factory: partition@40000 {
+ compatible = "nvmem-cells";
label = "factory";
reg = <0x40000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
read-only;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x400>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x200>;
+ };
+
+ macaddr_factory_2e: macaddr@2e {
+ reg = <0x2e 0x6>;
+ };
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
};
partition@50000 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
led {
led-sources = <0>;
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
led {
};
ðernet {
- mtd-mac-address = <&factory 0xe000>;
+ pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan1";
+ };
+ wan: port@4 {
+ status = "okay";
+ label = "wan";
+ nvmem-cells = <&macaddr_factory_2e>;
+ nvmem-cell-names = "mac-address";
+ };
+ };
};
&state_default {
gpio {
- ralink,group = "wdt", "rgmii2";
- ralink,function = "gpio";
+ groups = "wdt", "rgmii2";
+ function = "gpio";
};
};