ramips: Add support for Xiaomi Mi Router(Black,R2100)

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_xiaomi_redmi-router-ac2100.dts

diff --git a/target/linux/ramips/dts/mt7621_xiaomi_redmi-router-ac2100.dts b/target/linux/ramips/dts/mt7621_xiaomi_redmi-router-ac2100.dts
index f0bc1aeb967610a74e589e196de3e52d925ebcd9..ceaeec750c8c509c6b176542df5f819ff4fffe3f 100644 (file)
--- a/target/linux/ramips/dts/mt7621_xiaomi_redmi-router-ac2100.dts
+++ b/target/linux/ramips/dts/mt7621_xiaomi_redmi-router-ac2100.dts
@@ -1,10 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7621_xiaomi_router-ac2100.dtsi"
 
 / {
        compatible = "xiaomi,redmi-router-ac2100", "mediatek,mt7621-soc";
@@ -18,10 +15,6 @@
                label-mac-device = &gmac0;
        };
 
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
        leds {
                compatible = "gpio-leds";
 
@@ -45,139 +38,4 @@
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-};
-
-
-&nand {
-       status = "okay";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "Bootloader";
-                       reg = <0x0 0x80000>;
-                       read-only;
-               };
-
-               partition@80000 {
-                       label = "Config";
-                       reg = <0x80000 0x40000>;
-               };
-
-               partition@c0000 {
-                       label = "Bdata";
-                       reg = <0xc0000 0x40000>;
-                       read-only;
-               };
-
-               factory: partition@100000 {
-                       label = "factory";
-                       reg = <0x100000 0x40000>;
-                       read-only;
-               };
-
-               partition@140000 {
-                       label = "crash";
-                       reg = <0x140000 0x40000>;
-               };
-
-               partition@180000 {
-                       label = "crash_syslog";
-                       reg = <0x180000 0x40000>;
-               };
-
-               partition@1c0000 {
-                       label = "reserved0";
-                       reg = <0x1c0000 0x40000>;
-                       read-only;
-               };
-
-               /* We keep stock xiaomi firmware (kernel0) here */
-               partition@200000 {
-                       label = "kernel_stock";
-                       reg = <0x200000 0x400000>;
-               };
-
-               partition@600000 {
-                       label = "kernel";
-                       reg = <0x600000 0x400000>;
-               };
-
-               partition@a00000 {
-                       label = "ubi";
-                       reg = <0xa00000 0x7580000>;
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-};
-
-&pcie0 {
-       wifi@0,0 {
-               compatible = "mediatek,mt76";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-       };
-};
-
-&pcie1 {
-       wifi@0,0 {
-               compatible = "mediatek,mt76";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0000>;
-               ieee80211-freq-limit = <2400000 2500000>;
-       };
-};
-
-&gmac0 {
-       mtd-mac-address = <&factory 0xe000>;
-};
-
-&switch0 {
-       ports {
-               port@0 {
-                       status = "okay";
-                       label = "wan";
-                       mtd-mac-address = <&factory 0xe006>;
-               };
-
-               port@2 {
-                       status = "okay";
-                       label = "lan1";
-               };
-
-               port@3 {
-                       status = "okay";
-                       label = "lan2";
-               };
-
-               port@4 {
-                       status = "okay";
-                       label = "lan3";
-               };
-       };
-};
-
-&state_default {
-       gpio {
-               groups = "uart2", "uart3", "wdt";
-               function = "gpio";
-       };
 };