// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "Bootloader";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "Config";
- reg = <0x80000 0x40000>;
- };
-
- partition@c0000 {
- label = "Bdata";
- reg = <0xc0000 0x40000>;
- read-only;
- };
-
- factory: partition@100000 {
- label = "factory";
- reg = <0x100000 0x40000>;
- read-only;
- };
-
- partition@140000 {
- label = "crash";
- reg = <0x140000 0x40000>;
- };
-
- partition@180000 {
- label = "crash_syslog";
- reg = <0x180000 0x40000>;
- };
-
- partition@1c0000 {
- label = "reserved0";
- reg = <0x1c0000 0x40000>;
- read-only;
- };
-
- /* We keep stock xiaomi firmware (kernel0) here */
- partition@200000 {
- label = "kernel_stock";
- reg = <0x200000 0x400000>;
- };
-
- partition@600000 {
- label = "kernel";
- reg = <0x600000 0x400000>;
- };
-
- partition@a00000 {
- label = "ubi";
- reg = <0xa00000 0x7580000>;
- };
- };
-};
+#include "mt7621_xiaomi_nand_128m.dtsi"
&pcie {
status = "okay";
};
&gmac0 {
- mtd-mac-address = <&factory 0xe000>;
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy0>;
+
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&switch0 {
ports {
- port@0 {
- status = "okay";
- label = "wan";
- mtd-mac-address = <&factory 0xe006>;
- };
-
port@2 {
status = "okay";
label = "lan1";