ramips: use fixed layout cell "mac-base" for Netgear R6220
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_alfa-network_awusfree1.dts
index ffb8dbac628cc71221bde63c67a91a5d17e25ddd..f5cff3bb609a63f165d7e396200aa289c88d5c2d 100644 (file)
@@ -1,37 +1,9 @@
+// SPDX-License-Identifier: BSD-3-Clause
 /*
- *  BSD LICENSE
- *
  *  Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
  *  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    1. Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *    2. Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *    3. Neither the names of the copyright holders nor the names of any
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/dts-v1/;
-
 #include "mt7628an.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -57,7 +29,7 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
                compatible = "gpio-leds";
 
                led_system: system {
-                       label = "awusfree1:orange:system";
-                       gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+                       label = "orange:system";
+                       gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
-                       label = "awusfree1:blue:wlan";
-                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+                       label = "blue:wlan";
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
                };
        };
 };
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x2e>;
-};
-
-&gpio1 {
-       status = "okay";
+       nvmem-cells = <&macaddr_factory_2e>;
+       nvmem-cell-names = "mac-address";
 };
 
 &ohci {
        status = "disabled";
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "p0led_an", "wdt", "wled_an";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       gpio {
+               groups = "p0led_an", "wdt", "wled_an";
+               function = "gpio";
+       };
 
-               ext_lna {
-                       ralink,group = "uart1";
-                       ralink,function = "sw_r";
-               };
+       ext_lna {
+               groups = "uart1";
+               function = "sw_r";
+       };
 
-               ext_pa {
-                       ralink,group = "i2s";
-                       ralink,function = "antenna";
-               };
+       ext_pa {
+               groups = "i2s";
+               function = "antenna";
        };
 };
 
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
 
 &wmac {
        status = "okay";
+
        mediatek,mtd-eeprom = <&factory 0x0>;
 };
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_2e: macaddr@2e {
+               reg = <0x2e 0x6>;
+       };
+};