ramips: add support for mtk eip93 crypto engine
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_hiwifi_hc5661a.dts
index 25f1ff1a027e35cb500f66b0418e0e41d31956c4..9e4068ce8c7241c3931d52e11c12d43eabc0444e 100644 (file)
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7628an_hiwifi_hc5x61a.dtsi"
 
 / {
        compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
        model = "HiWiFi HC5661A";
 
-       aliases {
-               led-boot = &led_system;
-               led-failsafe = &led_system;
-               led-running = &led_system;
-               led-upgrade = &led_system;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x8000000>;
-       };
-
        leds {
                compatible = "gpio-leds";
 
                led_system: system {
-                       label = "hc5661a:blue:system";
-                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-               };
-               internet {
-                       label = "hc5661a:blue:internet";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+                       label = "blue:system";
+                       gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
                };
-               wlan2g {
-                       label = "hc5661a:blue:wlan2g";
-                       gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
 
-               reset {
-                       label = "reset";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
+               internet {
+                       label = "blue:internet";
+                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
                };
-       };
-};
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "refclk", "wled_an";
-                       ralink,function = "gpio";
+               wlan2g {
+                       label = "blue:wlan2g";
+                       gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "phy0tpt";
                };
        };
 };
 
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               linux,modalias = "m25p80", "w25q128";
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "hw_panic";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0xf70000>;
-                       };
-
-                       partition@fc0000 {
-                               label = "oem";
-                               reg = <0xfc0000 0x20000>;
-                               read-only;
-                       };
-
-                       bdinfo: partition@fe0000 {
-                               label = "bdinfo";
-                               reg = <0xfe0000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@ff0000 {
-                               label = "backup";
-                               reg = <0xff0000 0x10000>;
-                               read-only;
-                       };
-               };
+&state_default {
+       gpio {
+               groups = "i2c", "refclk", "wdt", "wled_an";
+               function = "gpio";
        };
 };
 
-&ethernet {
-       mtd-mac-address = <&factory 0x4>;
-       mediatek,portmap = "wllll";
+&ehci {
+       status = "disabled";
 };
 
-&wmac {
-       status = "okay";
+&ohci {
+       status = "disabled";
 };