ramips: update leds & buttons dts description
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_netgear_r6080.dts
index 5bca023c71818d256d5961dae5b28de2d958cdc9..73cfc47a6cc8dfeb5792c9b8ea2fdc1e83aecde1 100644 (file)
@@ -1,67 +1,14 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7628an_netgear_r6xxx.dtsi"
 
 / {
        compatible = "netgear,r6080", "mediatek,mt7628an-soc";
        model = "Netgear R6080";
 
        aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
                label-mac-device = &ethernet;
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               lan {
-                       label = "r6080:green:lan";
-                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-               };
-
-               led_power: power {
-                       label = "r6080:green:power";
-                       gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
-               };
-
-               wlan2g_green {
-                       label = "r6080:green:wlan2g";
-                       gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               wlan2g_orange {
-                       label = "r6080:orange:wlan2g";
-                       gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
-               };
-
-               wan_green {
-                       label = "r6080:green:wan";
-                       gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
-               };
-
-               wan_orange {
-                       label = "r6080:orange:wan";
-                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-               };
-       };
 };
 
 &state_default {
        };
 };
 
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <86000000>;
-               m25p,fast-read;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x40000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "nvram";
-                               reg = <0x60000 0x30000>;
-                               read-only;
-                       };
-
-                       partition@90000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x90000 0x760000>;
-                       };
-
-                       partition@7f0000 {
-                               label = "reserved";
-                               reg = <0x7f0000 0x10000>;
-                               read-only;
-                       };
-               };
+&partitions {
+       partition@90000 {
+               compatible = "denx,uimage";
+               label = "firmware";
+               reg = <0x90000 0x760000>;
        };
-};
-
-&wmac {
-       status = "okay";
-};
-
-&ethernet {
-       mtd-mac-address = <&factory 0x4>;
-};
-
-&pcie {
-       status = "okay";
-};
 
-&pcie0 {
-       wifi@0,0 {
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
+       partition@7f0000 {
+               label = "reserved";
+               reg = <0x7f0000 0x10000>;
+               read-only;
        };
 };