ramips: fix mtd partition node names for Phicomm PSG1208

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_tplink_re200.dtsi

diff --git a/target/linux/ramips/dts/mt7628an_tplink_re200.dtsi b/target/linux/ramips/dts/mt7628an_tplink_re200.dtsi
index a1acc556f27e6fb9bd982f8cdfad7159ee5cdaca..1a8b26b1cce3e8218ee75f3df7dec994e584dab6 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_tplink_re200.dtsi
+++ b/target/linux/ramips/dts/mt7628an_tplink_re200.dtsi
@@ -8,6 +8,10 @@
 / {
        aliases {
                label-mac-device = &ethernet;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
        };
 
        chosen {
@@ -29,12 +33,47 @@
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
+
+       leds {
+               compatible = "gpio-leds";
+
+               wps {
+                       label = "green:wps";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi {
+                       label = "green:wifi";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+
+               lan {
+                       label = "green:lan";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power: power {
+                       label = "green:power";
+               };
+
+               wifi2g_green {
+                       label = "green:wifi2g";
+                       gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wifi5g_green {
+                       label = "green:wifi5g";
+                       gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+       };
 };
 
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <50000000>;
@@ -71,16 +110,27 @@
        };
 };
 
+&state_default {
+       gpio {
+               groups = "p4led_an", "p3led_an", "p2led_an", "p1led_an",
+                               "p0led_an", "wled_an", "i2c", "wdt", "refclk";
+               function = "gpio";
+       };
+};
+
 &ethernet {
-       mtd-mac-address = <&config 0x2008>;
+       nvmem-cells = <&macaddr_config_2008>;
+       nvmem-cell-names = "mac-address";
 };
 
 &wmac {
        status = "okay";
 
        mediatek,mtd-eeprom = <&radio 0x0>;
-       mtd-mac-address = <&config 0x2008>;
-       mtd-mac-address-increment = <1>;
+
+       nvmem-cells = <&macaddr_config_2008>;
+       nvmem-cell-names = "mac-address";
+       mac-address-increment = <1>;
 };
 
 &pcie {
@@ -92,7 +142,18 @@
                reg = <0x0000 0 0 0 0>;
                mediatek,mtd-eeprom = <&radio 0x8000>;
                ieee80211-freq-limit = <5000000 6000000>;
-               mtd-mac-address = <&config 0x2008>;
-               mtd-mac-address-increment = <2>;
+               nvmem-cells = <&macaddr_config_2008>;
+               nvmem-cell-names = "mac-address";
+               mac-address-increment = <2>;
+       };
+};
+
+&config {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_config_2008: macaddr@2008 {
+               reg = <0x2008 0x6>;
        };
 };