ramips: dts: rt3050: reset FE and ESW cores together
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_tplink_re200.dtsi
index 2b06fe77a2203a78dd35d0bf599ce09689bc685d..8826365bebfd20889e3da40fbf4a38e66922b7eb 100644 (file)
@@ -8,6 +8,10 @@
 / {
        aliases {
                label-mac-device = &ethernet;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
        };
 
        chosen {
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
+
+       leds {
+               compatible = "gpio-leds";
+
+               wps {
+                       label = "green:wps";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi {
+                       label = "green:wifi";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+
+               lan {
+                       label = "green:lan";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power: power {
+                       label = "green:power";
+               };
+
+               wifi2g_green {
+                       label = "green:wifi2g";
+                       gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wifi5g_green {
+                       label = "green:wifi5g";
+                       gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+       };
 };
 
 &spi0 {
                                label = "config";
                                reg = <0x7c0000 0x30000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_config_2008: macaddr@2008 {
+                                               compatible = "mac-base";
+                                               reg = <0x2008 0x6>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
                        };
 
                        radio: partition@7f0000 {
                                label = "radio";
                                reg = <0x7f0000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_radio_0: eeprom@0 {
+                                               reg = <0x0 0x400>;
+                                       };
+
+                                       eeprom_radio_8000: eeprom@8000 {
+                                               reg = <0x8000 0x200>;
+                                       };
+                               };
                        };
                };
        };
 };
 
+&state_default {
+       gpio {
+               groups = "p4led_an", "p3led_an", "p2led_an", "p1led_an",
+                               "p0led_an", "wled_an", "i2c", "wdt", "refclk";
+               function = "gpio";
+       };
+};
+
 &ethernet {
-       mtd-mac-address = <&config 0x2008>;
+       nvmem-cells = <&macaddr_config_2008 0>;
+       nvmem-cell-names = "mac-address";
 };
 
 &wmac {
        status = "okay";
 
-       mediatek,mtd-eeprom = <&radio 0x0>;
-       mtd-mac-address = <&config 0x2008>;
-       mtd-mac-address-increment = <1>;
+       nvmem-cells = <&eeprom_radio_0>, <&macaddr_config_2008 1>;
+       nvmem-cell-names = "eeprom", "mac-address";
 };
 
 &pcie {
 &pcie0 {
        mt76@0,0 {
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&radio 0x8000>;
                ieee80211-freq-limit = <5000000 6000000>;
-               mtd-mac-address = <&config 0x2008>;
-               mtd-mac-address-increment = <2>;
+               nvmem-cells = <&eeprom_radio_8000>, <&macaddr_config_2008 2>;
+               nvmem-cell-names = "eeprom", "mac-address";
        };
 };