-/dts-v1/;
-
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
+ label-mac-device = ðernet;
};
chosen {
label = "sw1";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
modec2 {
label = "sw2";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
};
};
compatible = "gpio-leds";
led_power: power {
- label = "tl-mr3020-v3:green:power";
+ label = "green:power";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wan {
- label = "tl-mr3020-v3:green:3g";
+ label = "green:3g";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
trigger-sources = <&ehci_port1>, <&ohci_port1>;
linux,default-trigger = "usbport";
};
wlan {
- label = "tl-mr3020-v3:green:wlan";
+ label = "green:wlan";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps {
- label = "tl-mr3020-v3:green:wps";
+ label = "green:wps";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
lan {
- label = "tl-mr3020-v3:green:lan";
+ label = "green:lan";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <10000000>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
partitions {
compatible = "fixed-partitions";
};
};
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
&state_default {
gpio {
- groups = "i2s", "refclk", "wdt", "p2led_an", "p1led_an", "p0led_an", "wled_an";
+ groups = "i2s", "refclk", "wdt", "p4led_an", "p2led_an", "p1led_an", "p0led_an", "wled_an";
function = "gpio";
};
};
&wmac {
status = "okay";
- mtd-mac-address = <&factory 0xf100>;
+
mediatek,mtd-eeprom = <&factory 0x20000>;
+
+ nvmem-cells = <&macaddr_factory_f100>;
+ nvmem-cell-names = "mac-address";
};
ðernet {
- mtd-mac-address = <&factory 0xf100>;
+ nvmem-cells = <&macaddr_factory_f100>;
+ nvmem-cell-names = "mac-address";
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_f100: macaddr@f100 {
+ reg = <0xf100 0x6>;
+ };
};