ramips: mt7628: use mac-base

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_tplink_tl-wr840n-v5.dts

diff --git a/target/linux/ramips/dts/mt7628an_tplink_tl-wr840n-v5.dts b/target/linux/ramips/dts/mt7628an_tplink_tl-wr840n-v5.dts
index 72b6e71634c39cdabd313954c5c09458cd39dee6..3e639668bbaa0df62e7d7bbf0593507d1549dfe9 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_tplink_tl-wr840n-v5.dts
+++ b/target/linux/ramips/dts/mt7628an_tplink_tl-wr840n-v5.dts
@@ -33,12 +33,12 @@
                compatible = "gpio-leds";
 
                led_power_green: power {
-                       label = "tl-wr840n-v5:green:power";
+                       label = "green:power";
                        gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
                };
 
                orange {
-                       label = "tl-wr840n-v5:orange:power";
+                       label = "orange:power";
                        gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
                };
        };
@@ -73,6 +73,20 @@
                                label = "factory";
                                reg = <0x3f0000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x400>;
+                                       };
+
+                                       macaddr_factory_f100: macaddr@f100 {
+                                               reg = <0xf100 0x6>;
+                                       };
+                               };
                        };
                };
        };
@@ -88,11 +102,14 @@
 
 &wmac {
        status = "okay";
-       mtd-mac-address = <&factory 0xf100>;
+
+       nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_f100>;
+       nvmem-cell-names = "eeprom", "mac-address";
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0xf100>;
+       nvmem-cells = <&macaddr_factory_f100>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {