ramips: mt7621: convert Ubiquiti devices EEPROM to NVMEM format

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_unielec_u7628-01.dtsi

diff --git a/target/linux/ramips/dts/mt7628an_unielec_u7628-01.dtsi b/target/linux/ramips/dts/mt7628an_unielec_u7628-01.dtsi
index 3416714d96bfb19502e78c6108a79f4dd27c0c30..b31ffba80907814a6ffe94fb1b0d28dfb20be44a 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_unielec_u7628-01.dtsi
+++ b/target/linux/ramips/dts/mt7628an_unielec_u7628-01.dtsi
@@ -1,35 +1,8 @@
+// SPDX-License-Identifier: BSD-3-Clause
 /*
- *  BSD LICENSE
- *
  *  Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
  *  Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
  *  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
 #include "mt7628an.dtsi"
@@ -56,7 +29,7 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -65,74 +38,63 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "u7628-01:green:power";
-                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+                       label = "green:power";
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
-                       label = "u7628-01:green:wlan";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+                       label = "green:wlan";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                };
 
                wan {
-                       label = "u7628-01:green:wan";
-                       gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+                       label = "green:wan";
+                       gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
                };
 
                lan1 {
-                       label = "u7628-01:green:lan1";
-                       gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+                       label = "green:lan1";
+                       gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
                };
 
                lan2 {
-                       label = "u7628-01:green:lan2";
-                       gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+                       label = "green:lan2";
+                       gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
                };
 
                lan3 {
-                       label = "u7628-01:green:lan3";
-                       gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+                       label = "green:lan3";
+                       gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
                };
 
                lan4 {
-                       label = "u7628-01:green:lan4";
-                       gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+                       label = "green:lan4";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "u7628-01:green:usb";
-                       gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+                       label = "green:usb";
+                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
                };
        };
 };
 
-&gpio0 {
-       status = "okay";
-};
-
-&gpio1 {
-       status = "okay";
-};
-
 &pcie {
        status = "okay";
 };
 
-&ethernet {
-       mtd-mac-address = <&factory 0x28>;
-};
-
 &wmac {
        status = "okay";
+
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "refclk", "wdt", "wled_an";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       gpio {
+               groups = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "refclk", "wdt", "wled_an";
+               function = "gpio";
        };
 };