ramips: enable wireless LEDs activity blinking for TP-Link EC330-G5u v1

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_vocore_vocore2-lite.dts

diff --git a/target/linux/ramips/dts/mt7628an_vocore_vocore2-lite.dts b/target/linux/ramips/dts/mt7628an_vocore_vocore2-lite.dts
index fc8fc89b718c5f86c03462c09af74f84e4e418d4..26012a6a4f370302efac7a8b5a2d6add8eeb35ef 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_vocore_vocore2-lite.dts
+++ b/target/linux/ramips/dts/mt7628an_vocore_vocore2-lite.dts
@@ -1,9 +1,5 @@
-/dts-v1/;
-
 #include "mt7628an_vocore_vocore2.dtsi"
 
-#include <dt-bindings/gpio/gpio.h>
-
 / {
        compatible = "vocore,vocore2-lite", "vocore,vocore2", "mediatek,mt7628an-soc";
        model = "VoCore2-Lite";
@@ -19,48 +15,12 @@
                compatible = "gpio-leds";
 
                led_status: status {
-                       label = "vocore2lite:green:status";
-                       gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+                       label = "green:status";
+                       gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
                };
        };
 };
 
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0x7b0000>;
-                       };
-               };
-       };
+&firmware {
+       reg = <0x50000 0x7b0000>;
 };