ramips: convert MT7610 and MT7612 EEPROM to NVMEM format for MT7621

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3050_allnet_all0256n.dtsi

diff --git a/target/linux/ramips/dts/rt3050_allnet_all0256n.dtsi b/target/linux/ramips/dts/rt3050_allnet_all0256n.dtsi
index 40018e5e3f38717c6743f626d0487b686115ef1a..13933e335c3e14fcaed7872ca674fb5c85d3b3cb 100644 (file)
--- a/target/linux/ramips/dts/rt3050_allnet_all0256n.dtsi
+++ b/target/linux/ramips/dts/rt3050_allnet_all0256n.dtsi
@@ -10,17 +10,17 @@
                compatible = "gpio-leds";
 
                rssilow {
-                       label = "all0256n:green:rssilow";
+                       label = "green:rssilow";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                rssimed {
-                       label = "all0256n:green:rssimed";
+                       label = "green:rssimed";
                        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
                rssihigh {
-                       label = "all0256n:green:rssihigh";
+                       label = "green:rssihigh";
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
@@ -37,8 +37,44 @@
        };
 };
 
-&gpio0 {
+&spi0 {
        status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       firmware: partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               /* reg property is set based on flash size in DTS files */
+                       };
+               };
+       };
 };
 
 &state_default {
@@ -49,7 +85,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x28>;
+       nvmem-cells = <&macaddr_factory_28>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -59,3 +96,13 @@
 &wmac {
        ralink,mtd-eeprom = <&factory 0x0>;
 };
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_28: macaddr@28 {
+               reg = <0x28 0x6>;
+       };
+};