ramips: remove useless resets properties from SoC dtsi

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3050_alphanetworks_asl26555.dtsi

diff --git a/target/linux/ramips/dts/rt3050_alphanetworks_asl26555.dtsi b/target/linux/ramips/dts/rt3050_alphanetworks_asl26555.dtsi
index d1c21f8082a5fe540eb10173b0c7b3cb01612fae..41985278632a0da8bad8c2265bdc74aa1f24eade 100644 (file)
--- a/target/linux/ramips/dts/rt3050_alphanetworks_asl26555.dtsi
+++ b/target/linux/ramips/dts/rt3050_alphanetworks_asl26555.dtsi
@@ -34,72 +34,63 @@
                compatible = "gpio-leds";
 
                eth {
-                       label = "asl26555:green:eth";
+                       label = "green:eth";
                        gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
                };
 
                wan-red {
-                       label = "asl26555:red:wan";
+                       label = "red:wan";
                        gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
                };
 
                wan-green {
-                       label = "asl26555:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
                };
 
                wlan {
-                       label = "asl26555:green:wlan";
+                       label = "green:wlan";
                        gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
                };
 
                led_power_green: power-green {
-                       label = "asl26555:green:power";
+                       label = "green:power";
                        gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
                };
 
                power-red {
-                       label = "asl26555:red:power";
+                       label = "red:power";
                        gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
                };
 
                3g-green {
-                       label = "asl26555:green:3g";
+                       label = "green:3g";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&otg_port1>;
                        linux,default-trigger = "usbport";
                };
 
                3g-red {
-                       label = "asl26555:red:3g";
+                       label = "red:3g";
                        gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
                };
        };
 };
 
-&gpio0 {
-       status = "okay";
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       gpio {
+               groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
+               function = "gpio";
        };
 };
 
-&ethernet {
-       mtd-mac-address = <&devdata 0x4004>;
-};
-
 &esw {
        mediatek,portmap = <0x1e>;
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&devdata 0x4000>;
+       nvmem-cells = <&eeprom_devdata_4000>;
+       nvmem-cell-names = "eeprom";
 };
 
 &otg {