ramips: use fixed layout cell "mac-base" for Netgear R6220

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3050_alphanetworks_asl26555.dtsi

diff --git a/target/linux/ramips/dts/rt3050_alphanetworks_asl26555.dtsi b/target/linux/ramips/dts/rt3050_alphanetworks_asl26555.dtsi
index be57cd8e572e5998fc9706fdfcba934ef60c1f0c..6cd75da68bf1300e9975dbd563b60fb24f171cd8 100644 (file)
--- a/target/linux/ramips/dts/rt3050_alphanetworks_asl26555.dtsi
+++ b/target/linux/ramips/dts/rt3050_alphanetworks_asl26555.dtsi
@@ -34,53 +34,49 @@
                compatible = "gpio-leds";
 
                eth {
-                       label = "asl26555:green:eth";
+                       label = "green:eth";
                        gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
                };
 
                wan-red {
-                       label = "asl26555:red:wan";
+                       label = "red:wan";
                        gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
                };
 
                wan-green {
-                       label = "asl26555:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
                };
 
                wlan {
-                       label = "asl26555:green:wlan";
+                       label = "green:wlan";
                        gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
                };
 
                led_power_green: power-green {
-                       label = "asl26555:green:power";
+                       label = "green:power";
                        gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
                };
 
                power-red {
-                       label = "asl26555:red:power";
+                       label = "red:power";
                        gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
                };
 
                3g-green {
-                       label = "asl26555:green:3g";
+                       label = "green:3g";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&otg_port1>;
                        linux,default-trigger = "usbport";
                };
 
                3g-red {
-                       label = "asl26555:red:3g";
+                       label = "red:3g";
                        gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
                };
        };
 };
 
-&gpio0 {
-       status = "okay";
-};
-
 &state_default {
        gpio {
                groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
@@ -88,10 +84,6 @@
        };
 };
 
-&ethernet {
-       mtd-mac-address = <&devdata 0x4004>;
-};
-
 &esw {
        mediatek,portmap = <0x1e>;
 };